Popsicle Cottage Furniture (1:12) - Laser-Cut SVG Files

DIGITAL DOWNLOAD - you get the laser-cut files to make this set yourself. No furniture is shipped.

A 1:12 popsicle-stick style cottage furniture set: chair, table, stool, picket bed, sofa and 3-tier shelf.

A cozy 1:12 cottage furniture set in the popsicle-stick craft style: every surface is scored into stick planks with rounded stick ends. A chair with a slatted back, a dining table, a stool / side table, a bed with a picket headboard and scalloped footboard, a sofa with stick-panel arms and throw pillows, and a 3-tier shelf. Every frame locks together with tabs and slots - glue is only for the pillows; the mattress, blanket and seat cushions are felt and gingham fabric. Made to sit in our Room Boxes or any dollhouse. Files for 2.7, 3 and 4 mm plywood.

What you get (instant download)

• SVG cut files for 2.7 mm, 3 mm or 4 mm plywood (pick the folder that matches your calipers)
• 32-33 pieces on 2 boards, each 10 x 10 in
• Holding tabs on every piece: lift the whole sheet off the laser in one go and push the pieces out at the bench - nothing drops into the honeycomb
• Mirrored left/right pairs (chair sides, sofa arms, shelf sides), so the smooth face of the plywood ends up on the outside
• Every piece as its own SVG, for recutting a single part
• A 10-page instruction booklet: cutting guide, board maps, parts list, 8 illustrated assembly steps and paint colors
• Finished-model mockup images

Finished size

• Chair: 34 x 32 mm, 72 mm tall (seat 36 mm)
• Table: 68 x 51 x 61 mm
• Stool / side table: 38 x 30 x 38 mm
• Bed: 94 x 164 mm, headboard 80 mm tall
• Sofa: 152 x 64 x 68 mm
• Shelf (3 tiers): 68 x 25 x 93 mm
• Scale: 1:12

You'll need

• A laser cutter with at least a 10 x 10 in work area
• 2.7 mm, 3 mm or 4 mm plywood
• Wood glue (a small drop in each joint makes it permanent), fine sandpaper, optional acrylic paints
• Felt and fabric for the soft pieces (they keep the 1:12 set on two boards): cream felt - two 4 x 7 in pieces for the mattress and a 6 x 5 in piece for the sofa cushions, plus a 4 x 4 in scrap of blue gingham cotton for the blanket. Cut sizes are in the steps.

Laser-friendly files

Black = cut, blue = score. Part labels are single-line lettering on the score layer, so they mark in the same quick pass - no engraving.

This is a digital download. No physical items will be shipped.

License

You may cut these files as often as you like and sell finished, physical models you make from them. Please don't share, resell or give away the digital files, or sell unassembled cut kits made from them without permission.