Dining Set (1:12) - Laser-Cut SVG Files

DIGITAL DOWNLOAD - you get the laser-cut files to make this set yourself. No furniture is shipped.

A 1:12 dining set: a plank-top table with splayed legs and four curved-back armchairs.

A 1:12 dining set: a plank-top table with splayed legs and four armchairs with curved arm-and-back rails. The table's end frames carry the legs in one piece and tenon up into the top; each chair's side frames are one piece too, and the curved arm rail and back layers lock over the leg tenons. The chair arms tuck under the table top. Every piece locks in, so nothing needs holding while glue sets. Files for 2.7, 3 and 4 mm plywood.

What you get (instant download)

• SVG cut files for 2.7 mm, 3 mm or 4 mm plywood (pick the folder that matches your calipers)
• 37 pieces on 2 boards, each 10 x 10 in
• Holding tabs on every piece: lift the whole sheet off the laser in one go and push the pieces out at the bench - nothing drops into the honeycomb
• Mirrored left/right pairs (each chair's Side L and Side R, and the table's two end frames), so the smooth face of the plywood ends up on the outside
• Every piece as its own SVG, for recutting a single part
• A 9-page instruction booklet: cutting guide, board maps, parts list, 7 illustrated assembly steps and paint colors
• Finished-model mockup images

Finished size

• Table: 150 x 75 mm, 62.5 mm tall - a 1800 x 900 mm table at 1:12
• Chair: 47 x 55 mm, 63 mm tall (seat 37.5 mm high) - a 560 x 600 mm, 760 mm armchair at 1:12
• Scale: 1:12

You'll need

• A laser cutter with at least a 10 x 10 in work area
• 2.7 mm, 3 mm or 4 mm plywood
• Wood glue (a small drop in each joint makes it permanent), fine sandpaper, optional acrylic paints

Laser-friendly files

Black = cut, blue = score. Part labels are single-line lettering on the score layer, so they mark in the same quick pass - no engraving.

This is a digital download. No physical items will be shipped.

License

You may cut these files as often as you like and sell finished, physical models you make from them. Please don't share, resell or give away the digital files, or sell unassembled cut kits made from them without permission.