Clucking Palace: The Royal Coop (1:24) - Laser-Cut SVG Files

DIGITAL DOWNLOAD - you get the laser-cut files to make this yourself. Nothing is shipped.

The Clucking Palace: a royal little chicken coop on a plank yard. A board-and-batten coop stands on two leg frames under a steep shingled roof with scalloped gable trim and a cupola with a rooster weathervane. A CLUCKING PALACE sign sits under a crown cut-out in the gable, over an arched plank door. The hens walk up a cleated ramp from a pop hole into a picket run with a gate, a water trough and a feed sack. The whole roof lifts off in one piece to show the three nesting boxes inside. Every structural piece locks in with tabs, so nothing needs holding while glue sets. Files for 2.7, 3 and 4 mm plywood.

What you get (instant download)

• SVG cut files for 2.7 mm, 3 mm or 4 mm plywood (pick the folder that matches your calipers)
• 44 pieces on 2 boards, each 10 x 10 in
• Every piece as its own SVG, for recutting a single part
• A 9-page instruction booklet: cutting guide, board maps, parts list, 6 illustrated assembly steps and paint colors
• Finished-model mockup images

Finished size

• Yard base: 152 x 127 mm (6 x 5 in)
• Coop: 51 x 46 mm, 89 mm to the ridge, 137 mm to the weathervane
• Scale: 1:24

You'll need

• A laser cutter with at least a 10 x 10 in work area
• 2.7 mm, 3 mm or 4 mm plywood
• Wood glue, fine sandpaper, acrylic paints

Laser-friendly files

Black = cut, blue = score. Part labels are single-line lettering on the score layer, so they mark in the same quick pass - no engraving.

This is a digital download. No physical items will be shipped.

License

You may cut these files as often as you like and sell finished, physical models you make from them. Please don't share, resell or give away the digital files, or sell unassembled cut kits made from them without permission.