Blank Room Box - Large - Laser-Cut SVG Files

An empty 9.5 x 9.3 x 7.6 in open-front room box for full 1:12 rooms, ready for any scene.

An empty open-front room box, ready for any scene you want to build: full 1:12 rooms, same box as the Laundry Room and Fly Tier's Den. The inner side walls angle in toward the back for a forced-perspective look, the floor is scored with planks, two keyholes with nail pockets let it hang flat on a wall, and a flat 1/2 in front trim glues on and hides every joint. Files are included for 2.7, 3, 4 and 5 mm plywood.

What you get (instant download)

• SVG cut files for 2.7 mm, 3 mm, 4 mm or 5 mm plywood (pick the folder that matches your calipers)
• 11 pieces on 9 boards, each 10 x 10 in
• Every piece as its own SVG, for recutting a single part
• An 11-page instruction booklet: cutting guide, board maps, parts list, 6 illustrated assembly steps and paint colors
• Finished-model mockup images

Finished size

• Outside: 241 x 236 x 193 mm (9.5 x 9.3 x 7.6 in) W x H x D
• Room opening: about 8.5 x 8.3 in inside the trim
• Good for: Full 1:12 rooms, same box as the Laundry Room and Fly Tier's Den
• Front trim: 1/2 in (12.7 mm) wide on 2.7 and 3 mm; 13.5 mm on 4 mm and 16.5 mm on 5 mm so it still covers the inner-wall edges

You'll need

• A laser cutter with at least a 10 x 10 in work area
• 2.7 mm, 3 mm, 4 mm or 5 mm plywood
• Wood glue, fine sandpaper, acrylic paints

Laser-friendly files

Black = cut, blue = score. Part labels are single-line lettering on the score layer, so they mark in the same quick pass - no engraving.

This is a digital download. No physical items will be shipped.

License

You may cut these files as often as you like and sell finished, physical models you make from them. Please don't share, resell or give away the digital files, or sell unassembled cut kits made from them without permission.